compression test

基本解释

The deforming process in metal forging is simulated through the compression test in which several workblanks of different size are tested on the tools with different surface roughness.
文章通过几个不同尺寸坯料在不同表面粗糙度的工具上进行的压缩试验，模拟金属锻造的变形过程；
The conductive coat has been applied on concrete test blocks during the compression test, the data shows that the conductive coat is rather sensitive to formation and extension of tiny cracks.
将导电涂膜应用于混凝土试块的抗压试验，结果发现导电涂膜在快速加、卸载条件下对混凝土微裂缝的出现及扩展相当敏感。
At present, four methods are mainly used for reinforcement earth research: prototype test, model test, three-axial compression test, direct shear test and drawing test.
目前加筋土的试验研究主要有四种方法：原型试验、模型试验、三轴压缩试验、直剪试验和拉拔试验。

The report goes on to state that Iran went beyond such theoretical studies and built a large containment vessel at its Parchin military base, starting in 2000, to test the feasibility of such explosive compression.
ECONOMIST: Israel squares up to Iran

压缩试验
Finally, we simulate the uniaxial compression test of the asphalt mortar applied by numerical model established by the PFC, and research the influence of microscopic parameters to the virtual experiment results.
最后,利用离散元理论所建立起来的PFC数值模型进行沥青砂浆单轴压缩试验模拟,并研究了模拟中的细观参数的选取对虚拟试验结果的影响。
能源科学技术
压缩试验
The effects of interval time on the structur e and properties of7075 aluminum alloy during the two-stage hot compression de formation were investigated by isothermal compression test at gleeble-1500 ther mal-mechanical simulator.
在Gleeble-1500热模拟试验机上，采用高温等温压缩试验，研究了7075铝合金两道次热压缩变形道次间隔时间对合金组织和性能的影响。
压缩实验